.250 Pitch

Showing 1–16 of 93 results

• Read more

  Arbor Tip Carving Bar : CCA-C1-14-50 – C1 Mount, 14 Inches, .050 Gauge (0.250 Pitch = 78 Drive Links, 0.325 Pitch = 62 Drive Links, 0.375/0.370 Pitch (Low Profile)= 55 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Arbor Tip Carving Bar : CCA-C1-16-50 – C1 Mount, 16 Inches, .050 Gauge (0.250 Pitch = 86 Drive Links, 0.325 Pitch = 68 Drive Links, 0.375/0.370 Pitch (Low Profile)= 60 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Arbor Tip Carving Bar : CCA-C1-18-50 – C1 Mount, 18 Inches, .050 Gauge (0.250 Pitch = 93 Drive Links, 0.325 Pitch = 72 Drive Links, 0.375/0.370 Pitch (Low Profile)= 64 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Arbor Tip Carving Bar : CCA-H1-16-50 – H1 Mount, 16 Inches, .050 Gauge (0.250 Pitch = 86 Drive Links, 0.325 Pitch = 68 Drive Links, 0.375/0.370 Pitch (Low Profile)= 60 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Arbor Tip Carving Bar : CCA-H1-18-50 – H1 Mount, 18 Inches, .050 Gauge (0.250 Pitch = 93 Drive Links, 0.325 Pitch = 72 Drive Links, 0.375/0.370 Pitch (Low Profile)= 64 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Arbor Tip Carving Bar : CCA-H1-20-50 – H1 Mount, 20 Inches, .050 Gauge (0.250 Pitch = 103 Drive Links, 0.325 Pitch = 80 Drive Links, 0.375/0.370 Pitch (Low Profile)= 71 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Arbor Tip Carving Bar : CCA-S1-16-50 – S1 Mount, 16 Inches, .050 Gauge (0.250 Pitch = 86 Drive Links, 0.325 Pitch = 68 Drive Links, 0.375/0.370 Pitch (Low Profile)= 60 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Arbor Tip Carving Bar : CCA-S1-18-50 – S1 Mount, 18 Inches, .050 Gauge (0.250 Pitch = 93 Drive Links, 0.325 Pitch = 72 Drive Links, 0.375/0.370 Pitch (Low Profile)= 64 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Arbor Tip Carving Bar : CCA-S1-20-50 – S1 Mount, 20 Inches, .050 Gauge (0.250 Pitch = 103 Drive Links, 0.325 Pitch = 80 Drive Links, 0.375/0.370 Pitch (Low Profile)= 71 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Dime Tip Carving Bar : CCD-C1-10-43 – C1 Mount, 10 Inches, .043 Gauge, 0.250 Pitch, 56 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-10-50 – C1 Mount, 10 Inches, .050 Gauge, 0.250 Pitch, 56 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-12-43 – C1 Mount, 12 Inches, .043 Gauge, 0.250 Pitch, 63 Drive Links (64 Drive Links for 9 Tooth Floating Rim Drive Sprocket) – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-12-50 – C1 Mount, 12 Inches, .050 Gauge, 0.250 Pitch, 63 Drive Links (64 Drive Links for 9 Tooth Floating Rim Drive Sprocket) – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-14-43 – C1 Mount, 14 Inches, .043 Gauge, 0.250 Pitch, 77 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-14-50 – C1 Mount, 14 Inches, .050 Gauge, 0.250 Pitch, 77 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-16-43 – C1 Mount, 16 Inches, .043 Gauge, 0.250 Pitch, 85 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.