12"

Showing 33–48 of 54 results

• Read more

  Cannon SuperBar : CSB-S1-12-63-H – REPLACEABLE HARD NOSE TIP, S1 Mount, 12 Inches, .063 Gauge (0.325 Pitch = 56 Drive Links, 0.375 Pitch = 49 Drive Links, 0.404 Pitch = 44 Drive Links)

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-12-50-2 – REPLACEABLE SPROCKET TIP, C1 Mount, 12 Inches, .050 Gauge, 0.325 Pitch, 52 Drive Links

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-12-50-3LM – REPLACEABLE SPROCKET TIP, C1 Mount, 12 Inches, .050 Gauge, 0.370 Pitch (Low Profile), 46 Drive Links

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-12-58-2 – REPLACEABLE SPROCKET TIP, C1 Mount, 12 Inches, .058 Gauge, 0.325 Pitch, 52 Drive Links

• Read more

  Dime Tip Carving Bar : CCD-C1-12-43 – C1 Mount, 12 Inches, .043 Gauge, 0.250 Pitch, 63 Drive Links (64 Drive Links for 9 Tooth Floating Rim Drive Sprocket) – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-12-50 – C1 Mount, 12 Inches, .050 Gauge, 0.250 Pitch, 63 Drive Links (64 Drive Links for 9 Tooth Floating Rim Drive Sprocket) – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Pole Pruner Angled Bar : CPP-C1-12-43 – C1 Mount, 12 Inches, .043 Gauge (0.250 Pitch = 61 Drive Links, 0.325 Pitch = 47 Drive Links, 0.375/0.370 Pitch (Low Profile) = 42 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-C1-12-50 – C1 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 61 Drive Links, 0.325 Pitch = 47 Drive Links, 0.375/0.370 Pitch (Low Profile) = 42 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-H1-12-43 – H1 Mount, 12 Inches, .043 Gauge (0.250 Pitch = 60 Drive Links, 0.325 Pitch = 46 Drive Links, 0.375/0.370 Pitch (Low Profile) = 43 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-H1-12-50 – H1 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 60 Drive Links, 0.325 Pitch = 46 Drive Links, 0.375/0.370 Pitch (Low Profile) = 43 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-H8-12-43 – H8 Mount, 12 Inches, .043 Gauge (0.250 Pitch = 66 Drive Links, 0.370 Pitch (Low Profile) = 44 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-H8-12-50 – H8 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 66 Drive Links, 0.370 Pitch (Low Profile) = 44 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-P5-12-43 – P5 Mount, 12 Inches, .043 Gauge (0.250 Pitch = 66 Drive Links, 0.370 Pitch (Low Profile) = 44 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-P5-12-50 – P5 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 66 Drive Links, 0.370 Pitch (Low Profile) = 44 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-S1-12-43 – S1 Mount, 12 Inches, .043 Gauge (0.250 Pitch = 60 Drive Links, 0.325 Pitch = 46 Drive Links, 0.375/0.370 Pitch (Low Profile) = 43 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-S1-12-50 – S1 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 60 Drive Links, 0.325 Pitch = 46 Drive Links, 0.375/0.370 Pitch (Low Profile) = 43 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain