28"

Showing 33–46 of 46 results

• Read more

  Cannon SuperBar : CSB-S1-28-63-H – REPLACEABLE HARD NOSE TIP, S1 Mount, 28 Inches, .063 Gauge (0.325 Pitch = 104 Drive Links, 0.375 Pitch = 91 Drive Links, 0.404 Pitch = 83 Drive Links)

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-28-50-2 – REPLACEABLE SPROCKET TIP, C1 Mount, 28 Inches, .050 Gauge, 0.325 Pitch, 98 Drive Links *Approx. Cutting Length 26″

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-28-50-3LM – REPLACEABLE SPROCKET TIP, C1 Mount, 28 Inches, .050 Gauge, 0.370 Pitch (Low Profile), 86 Drive Links *Approx. Cutting Length 26″

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-28-58-2 – REPLACEABLE SPROCKET TIP, C1 Mount, 28 Inches, .058 Gauge, 0.325 Pitch, 98 Drive Links *Approx. Cutting Length 26″

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-H1-28-50-2 – REPLACEABLE SPROCKET TIP, H1 Mount, 28 Inches, .050 Gauge, 0.325 Pitch, 99 Drive Links *Approx. Cutting Length 25″

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-H1-28-50-3LM – REPLACEABLE SPROCKET TIP, H1 Mount, 28 Inches, .050 Gauge, 0.370 Pitch (Low Profile), 88 Drive Links *Approx. Cutting Length 25″

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-H1-28-58-2 – REPLACEABLE SPROCKET TIP, H1 Mount, 28 Inches, .058 Gauge, 0.325 Pitch, 99 Drive Links *Approx. Cutting Length 25″

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-S1-28-50-2 – REPLACEABLE SPROCKET TIP, S1 Mount, 28 Inches, .050 Gauge, 0.325 Pitch, 98 Drive Links *Approx. Cutting Length 25″

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-S1-28-50-3LM – REPLACEABLE SPROCKET TIP, S1 Mount, 28 Inches, .050 Gauge, 0.370 Pitch (Low Profile), 86 Drive Links *Approx. Cutting Length 25″

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-S1-28-58-2 – REPLACEABLE SPROCKET TIP, S1 Mount, 28 Inches, .058 Gauge, 0.325 Pitch, 98 Drive Links *Approx. Cutting Length 25″

• Read more

  Toonie Tip Carving Bar : CCT-H1-28-43 – H1 Mount, 28 Inches, .043 Gauge (0.250 Pitch = 130 Drive Links, 0.325 Pitch = 102 Drive Links, 0.375/0.370 Pitch (Low Profile)= 90 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Toonie Tip Carving Bar : CCT-H1-28-50 – H1 Mount, 28 Inches, .050 Gauge (0.250 Pitch = 130 Drive Links, 0.325 Pitch = 102 Drive Links, 0.375/0.370 Pitch (Low Profile)= 90 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Toonie Tip Carving Bar : CCT-S1-28-43 – S1 Mount, 28 Inches, .043 Gauge (0.250 Pitch = 130 Drive Links, 0.325 Pitch = 102 Drive Links, 0.375/0.370 Pitch (Low Profile)= 90 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Toonie Tip Carving Bar : CCT-S1-28-50 – S1 Mount, 28 Inches, .050 Gauge (0.250 Pitch = 130 Drive Links, 0.325 Pitch = 102 Drive Links, 0.375/0.370 Pitch (Low Profile)= 90 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain