50

Showing 257–272 of 296 results

• Read more

  Dime Tip Carving Bar : CCD-C1-14-50 – C1 Mount, 14 Inches, .050 Gauge, 0.250 Pitch, 77 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-16-50 – C1 Mount, 16 Inches, .050 Gauge, 0.250 Pitch, 85 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-8-50 – C1 Mount, 8 Inches, .050 Gauge, 0.250 Pitch, 48 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Pole Pruner Angled Bar : CPP-C1-12-50 – C1 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 61 Drive Links, 0.325 Pitch = 47 Drive Links, 0.375/0.370 Pitch (Low Profile) = 42 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-H1-12-50 – H1 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 60 Drive Links, 0.325 Pitch = 46 Drive Links, 0.375/0.370 Pitch (Low Profile) = 43 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-H8-10-50 – H8 Mount, 10 Inches, .050 Gauge (0.250 Pitch = 58 Drive Links, 0.370 Pitch (Low Profile) = 40 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-H8-12-50 – H8 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 66 Drive Links, 0.370 Pitch (Low Profile) = 44 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-P5-10-50 – P5 Mount, 10 Inches, .050 Gauge (0.250 Pitch = 56 Drive Links, 0.370 Pitch (Low Profile) = 39 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-P5-12-50 – P5 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 66 Drive Links, 0.370 Pitch (Low Profile) = 44 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-S1-12-50 – S1 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 60 Drive Links, 0.325 Pitch = 46 Drive Links, 0.375/0.370 Pitch (Low Profile) = 43 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-S5-10-50 – S5 Mount, 10 Inches, .050 Gauge (0.250 Pitch = 56 Drive Links, 0.370 Pitch (Low Profile) = 39 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Pole Pruner Angled Bar : CPP-S5-12-50 – S5 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 66 Drive Links, 0.370 Pitch (Low Profile) = 44 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : C1 Mount, 12 Inches, .050 Gauge (0.250 Pitch = 64 Drive Links, 0.325 Pitch = 50 Drive Links, 0.370 Pitch (Low Profile) = 45 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : C1 Mount, 14 Inches, .050 Gauge (0.250 Pitch = 78 Drive Links, 0.325 Pitch = 61 Drive Links, 0.370 Pitch (Low Profile) = 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : C1 Mount, 16 Inches, .050 Gauge (0.250 Pitch = 86 Drive Links, 0.325 Pitch = 67 Drive Links, 0.370 Pitch (Low Profile) = 60 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : C1 Mount, 20 Inches, .050 Gauge (0.250 Pitch = 102 Drive Links, 0.325 Pitch = 80 Drive Links, 0.370 Pitch (Low Profile) = 71 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain